SAGGING RECLINER SUPPORT
Restores a sagging recliner seat cushion by using a durable yet cushioning material installed above the seat springs. Rests against the seat cushion from below to increase seat firmness.
We’ve been repairing recliners using this same basic method and have decades of experience in the furniture industry. But, this is a DIY repair kit and is a little more involved than you may want to tackle.
Turn the recliner over and inspect. Check that you have zig-zag springs as shown. This will not work with a broken seat spring. Will not work with strap webbing or coil spring construction (big man’s chair).
Install by turning the recliner up-side-down with the footrest extended and feeding a specialized foam material above the seat springs to compress foam density in the cushion above.
You can install different thickness configurations. Stack 1, 2, or 3 pieces thick until you get the amount of support you need. There is no need to cover or support the entire seat area.
To install, slowly work it across by hand, using no tools. It’s not complicated or that difficult to do, but is easier using 2 people. One pulls up on the springs while the other pushes and pulls it across inch by inch.
The repair kit contains three 6″ x 18″ x .5″ pieces. Made in the USA. Try one first to test your results. Instructions and a phone number for support are included.
We recommend that you order one sagging recliner support seat cushion repair kit for each recliner seat and test your results first. Our kit offers a tremendous value if you can delay buying new furniture. Made in the USA